Available Wheels

Electroplated Diamond Wheels

Grind and polish the packs and edges of your fused and casted glass work. Use the 100 mesh wheel to shape your glass pieces, the 220 mesh wheel to smooth them and the 600 mesh wheel to pre-polish your glass pieces before final polishing with the felt wheel and cerium oxide. The 8" wheels are typically used to grind larger pieces, straights and curves, while the 4" wheels are typically used on small pieces and tight inside curves.

8" x 1-1/2" x 1" (20cm x 4cm x 2.54cm) 80 mesh 120 mesh 220 mesh 360 mesh 600 mesh 4" x 1-1/2" x 1" (10cm x 4cm x 2.54cm) 80 mesh 120 mesh 220 mesh 360 mesh 600 mesh

Bonded Diamond Wheels

These wheels have a full 1/8" of diamond depth bonded to their surface. Constructed of a sintered board bonded with bronze, these wheels far out last the electroplated diamond wheels. An economical choice for the artist that is grinding many pieces per day.

8" x 1-1/2" x 1" (20cm x 4cm x 2.54cm) 100 mesh 220 mesh 600 mesh 4" x 1-1/2" x 1" (10cm x 4cm x 2.54cm) 100 mesh 220 mesh 600 mesh

Electroplated Diamond Radius Wheels

For the hot glass worker, these wheels are ideal for removing punty marks or creating surface decoration to your finished work.

4" x 1-1/2" x 1" (10cm x 4cm x 2.54cm) 100 mesh 260 mesh 600 mesh

Stone Wheels

These wheels are made of high quality aluminum oxide composite stone, specially manufactured to our specifications. When dressed to shape, they will cut an unlimited number of notching patterns, honey-combing, crosshatching and freehand sculptural design. V-groove the backs of your fused plates and bowls. Add interesting surface decoration. Grind sculptural pieces and add in detail to casted work.

6" x 1/2" x 1" (15cm x 1.3cm x 2.54cm) 5" x 1/2" x 1" (13cm x 1.3cm x 2.54cm) 4" x 1/2" x 1" (10cm x 1.3cm x 2.54cm) 3-3/4" x 3/4" x 1" (9.5cm x 2cm x 2.54cm) 3-3/4" x 1/2" x 5/8" (9.5cm x 1.3cm x 1.6cm) 2" x 1/2" x 1" (5cm x 1.3cm x 2.54cm)

Diamond Engraving Wheels

Use these electroplated diamond wheels to V-groove the backs of your fused and casted work. Draw lines, add detail or grind those small imperfections out.

Small Raduis Wheel 4" x 1/8" x 1" (5cm x .32cm x 2.54cm) 5" x 1/8" x 1" (13cm x .32cm x 2.54cm) 100 mesh 100 mesh 260 mesh 260 mesh 600 mesh 600 mesh "V" Wheel 4" x 1/4" x 1" (5cm x .64cm x 2.54cm) 5" x 1/4" x 1" (13cm x .64cm x 2.54cm) 100 mesh 100 mesh 260 mesh 260 mesh 600 mesh 600 mesh

Flexible Rubber Drum When mounted on the SAG-1, it acts like a wet belt sander to seam edges and grind backs of bent pieces. Choose from several mesh sizes of belts to get the finish you need. 8" x 3" x 1" (20cm x 7.6cm x 2.54cm). Uses 3" x 25-7/32" (7.6cm x 64cm) belts below.

Flexible Diamond Belts

A quick way to seam edges of glass pieces or grind the backs of finished pieces. Fit the flexible rubber drum above. Choose from several mesh sizes to get the desired finish. 3" x 25-7/32" (7.6cm x 64cm)

60 mesh 400 mesh 120 mesh 800 mesh 200 mesh 1800 mesh

Cork Wheels

These wheels are made of high-density cork. Use to pre-polish out the cut work from the diamond wheels or flexible belt applications. Pumice is applied for the pre-polishing step.

10" x 2" x 1" (25cm x 5cm x 2.54cm) 6" x 1-1/2" x 1" (15cm x 4cm x 2.54cm) 6" x 1/2" x 1" (15cm x 1.3cm x 2.54cm)

Felt Wheels

Manufactured from high quality dense felt, these wheels are used in the last step of the polishing process. Charged with cerium oxide, they give a high lustre polish to the glass.

10" x 2" x 1" (25cm x 5cm x 2.54cm) 6" x 1-1/2" x 1" (15cm x 4cm x 2.54cm) 6" x 1/2" x 1" (15cm x 1.3cm x 2.54cm)